Back
to Contents Page
Toshiba XM-1902B CD-ROM
Introduction
General Features | Drive Speed |
BUS
Interface |
Disc Formats |
Front Panel
General Features
| Tray Loading
Mechanism |
| 3-way Disc Eject (eject
button, software, emergency eject hole) |
| 99ms Average Access Time |
| DAE (Digital Audio
Extraction) Audio Capability |
| MPC3 Compatibility |
| Light Weight all
Aluminum Cabinet Structure |
Drive Speed
24X
top
of page
BUS Interface
ATAPI
Types of Disc Formats Supported
Red-Book
Yellow-Book
CD-ROM-XA
CD-I Bridge (Photo-CD, Video CD)
CD-I
-
CD-I Ready
CD-G
Multi-session (Photo-CD, CD Extra, CD-RW, CD-R)
top of page
Front Panel
Figure 1.XM-1902B CD-ROM Front Panel
| Eject Button |
The EJECT button is used to open the disc tray so you can install or remove a disc. |
| Busy Indicator |
When you install a disc into the CD-ROM drive, the BUSY light flashes slowly as it
attempts to locate the disc. One of the following will occur:
- BUSY light goes out. The CD-ROM drive is ready to read data from the disc.
- BUSY light flashes slowly. The disc may be dirty.
- BUSY light remains ON. The CD-ROM is accessing data.
- BUSY light remains ON indefinitely. The CD-ROM is experiencing an error
|
Emergency
Eject Hole |
The emergency eject hole is to be used only when the CD tray will not open when EJECT
button is pressed. |
| CD Tray |
Insert CD Disc in tray. |
top of page
|
